Our Price $599.95
|
PGX24
with SM86 Microphone
The PSM200 is a frequency-agile, in-ear monitor system
for use in a wide variety of applications. Its many features help overcome
the difficulties associated with stage monitoring.
Features:
-Sound Quality Hear yourself perfectly.
-Mobility your mix moves with you onstage.
-Control Create your own monitor mix.
-Portability Easy to load in and out.
-Affordable, full-featured entry to personal monitoring.
Includes:
P2T Wireless TransMixer
Key Features:
-Built-in audio limiter
-Front mounted antenna
-2 mic/line input channels for mix control
ü rack space
Operating Controls:
-Input level control
-Frequency select
LED Indicators:
-Tri-color input level
Frequency
Inputs: 2 Mic/line, XLR Õ in. combo input channels
Outputs: 2 XLR split outputs
P2R Hybrid Bodypack Receiver
Key Features:
-Frequency locator
-Built-in headphone limiter
-Integrated cable management
-High-impact plastic chassis
-Õ in. Line inpit jack with high/low gain switch
Operating Controls:
-Volume knob
-Frequency select
LED Indicators:
-Power
-RF reception
-Frequency
-Limiter
-Low Battery
E2 Dynamic-Driver Earphones
Unobtrusive, Low Mass/High EnergyTM Shure earphones are designed
specifically for use with Shure PSM systems and deliver the incredible sound
and performance ear buds and other headphones can't. Don't go In Ear without
them.
Along with their high fidelity, full-bandwidth transducers, the natural
design of these stereo earphones allows them to rest comfortably in the ear
canal, providing a tight seal for sonic isolation and a snug fit. Shure
Universal Earphones can be used with foam, flex or triple flange accessory
sleeves (provided). The universal 3.5mm (1/8 in.) plug connects to Shure's
PSM body pack receivers, as well as many other personal audio applications
where high fidelity is deemed appropriate.
Get In Ear From Here
Whether you're playing live or rehearsing, you need to hear yourself to be
your best. That's what monitoring is all about. Yet some performers still
struggle with booming floor wedge monitors and loud stage volume.
Introducing the PSM 200 - the personal monitoring breakthrough performers
have been waiting for. Featuring smart, versatile components that grow with
you as your needs change, the PSM 200 series is a practical alternative to
floor wedges for performers who want to start out In Ear and stay there.
Technical Description
RF Carrier Frequency Range: 518š865 MHz (country
dependent)
Operating Range: 100 m (300 ft.) under optimal conditions
Audio Frequency Response: 30 Hz to 12 kHz (+/š3 dB); earphone dependent
Total Harmonic Distortion (1 kHz): <1% typical (Ref. ±35 kHz deviation)
Modulation: FM ±35 kHz Deviation (Nominal)
Signal-to-Noise Ratio: 80 dB typical (A-weighted)
Operating Temperature: š7 C to +49 C (+20 F to +120 F)
P2T
RF Output Power: 30 mW (+15 dBm) typical conducted
Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
Antenna: Õ in. wavelength, semi-rigid, PCB Mount
Current: 170 mA maximum
Dimensions: 220 mmx 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
Net Weight: 370 g (13 oz.)
RF Sensitivity: š109 dBm typical
Squelch Threshold: š102 dBm typical
Antenna: Attached Whip
Audio Input Connector
Connector Type: Õ in. Mono
Impedance: 1 M
Maximum Input Level: LO = +0 dBu, HI = š10 dBu
Frequency Response: 30 Hz to 20 kHz (+/š3 dB); earphone dependent
Power Requirements: 9 V alkaline battery, Duracell type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector: 1/8 in. (3.5 mm)
Minimum Load Impedance: 8 Ω
Net Weight: 100 g (3.52 oz.), less battery
Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251
in.)
E2
Net Weight: 30g (1 oz)
Transducer Type: dynamic
Sensitivity (at 1 kHz): 105 dB SPL/mW
Impedance (at 1 kHz) 16 ohms
Output Connector: Gold-plated stereo, 3.5 mm (1/8 in.) phone plug
Cable Length: 1.57 m (62 in.)
Our Price $599.95 |
